Skip to main content

Solar and Battery FAQs, Northern Rivers NSW

Straight answers from local Northern Rivers electricians. Can’t find yours? Call 0483 903 020.

★★★★★ Rated 5.0 from 66 Google reviews · read them on Google · read them on our reviews page

Jump to: Battery size, brands and blackout backup · Your existing solar, roof and switchboard · Rebates, the NSW 0% loan and cost · Install, grid connection and paperwork · EV chargers, off-grid and energy plans · About us and getting started

Battery size, brands and blackout backup

What size battery do I need, and is a bigger one worth it?

It depends on how much power you use from late afternoon until the sun is back, whether your solar can fill the battery (in winter too) and whether you want blackout backup. We work it out from one or two recent power bills. Bigger isn’t always better: the federal rebate is full on the first 14 kWh, reduced from 14 to 28 kWh and much lower from 28 to 50 kWh, and a battery that never empties overnight is capacity you aren’t using. If your quote looks too big or too small, ask us and we’ll show you why we chose that size. See what size battery do I need.

Which batteries do you install?

Sigenergy is our premium option and GoodWe (the ESA all-in-one with 8 kWh modules) is our high-quality mid-tier option. We also install Sungrow, Solax and Tesla. Panels are AIKO or Jinko.

What’s the difference between Sigenergy and GoodWe?

Both are modular all-in-one systems that can grow later, and both come in single-phase and three-phase versions. Sigenergy is our premium option: SigenStor stacks the inverter, 9 kWh battery modules (9, 18, 27, 36 or 45 kWh) and energy management in one unit, with detailed monitoring and its own EV charger option. GoodWe’s ESA is our mid-tier option, very high quality, with 8 kWh modules (8, 16, 24, 32 or 40 kWh) at a lower price point. Near the beach the makers’ coastal rules can decide it, and we recommend one for your home after looking at your bills. See how to choose a battery, Sigenergy batteries and GoodWe batteries.

How long does a battery last?

Typically 10 to 15 years, and our batteries come with a 10-year warranty.

Is a battery worth it for me?

It depends on your bills, your solar and what a blackout would cost you. A battery tends to make sense when you send a lot of solar to the grid in the day and use most of your power in the evening, when backup matters to you, or when your time-of-use plan has a big gap between peak and off-peak. If you have a small solar system or use most of your power in the day, it may add little, and we’ll tell you that. We don’t promise savings: we show you the design and the numbers from your own bills. See is a home battery worth it.

Where can the battery go: garage, shed or an outside wall?

There are strict rules on where a battery can go, covering the wall it’s fixed to and the distance from doors, windows and living areas. A garage, a shed or an outside wall can all work if the spot meets the rules and the maker’s requirements for clearance, ventilation and weather. Many batteries are rated for outdoor installation, and a bollard may be needed where a car could hit it. The exact distances depend on the standard, the battery and your building, so we confirm a compliant position with you on the site visit before install rather than quote a number here. See where a home battery can be installed.

Can I have a battery if I live near the beach?

Usually, but the brand and the spot need checking first. Most battery makers set rules for homes within about 500 m of the coastline, and AIKO and Jinko panels have their own steps from 50 m. We check the makers’ rules for your address before anything is ordered. See solar and batteries near the coast.

Will a battery keep my power on in a blackout?

A typical install from us backs up the whole home, unless you ask us to leave some circuits out (an EV charger, for example). We confirm exactly what will stay on during the site visit. The system switches your home over automatically when the grid drops out; how quickly depends on the battery model and the backup hardware fitted, and we test the switch-over before we leave. If someone at home relies on equipment that can’t lose power even briefly, such as medical equipment, tell us so we can plan around it. See blackout backup batteries.

Can I add a battery later?

Yes. We can design your solar to be battery-ready, so adding one later is straightforward.

Can I add more battery later, or add to a battery I already have?

With modular systems, yes: Sigenergy grows in 9 kWh modules and the GoodWe ESA in 8 kWh modules, so we can design with room to grow. Whether more can be added to a battery you already have depends on its brand and model, so we check it first. The federal rebate allows one battery claim per property, so it’s worth talking about future needs (an EV, a pool, working from home) when we size it. See battery sizing.

Can the battery’s smart load controls be switched off?

Smart load control is optional. Where we fit it (for example a smart load controller linked to a Sigenergy system), we agree with you which appliances it runs on surplus solar and show you how it works at handover. If you’d rather keep an appliance under your own control, tell us and we leave it off the controller.

For the long answers in one place, read the Northern Rivers home battery buyer’s guide.

Your existing solar, roof and switchboard

Can I add a battery to my existing solar?

Usually, yes. We check your bills to see whether your panels can cover the day and charge a battery for the night. If they can, it’s battery only. If not, we design the extra solar you need. Your existing panels usually stay. Some batteries connect alongside your current inverter (AC-coupled); others bring their own hybrid inverter, which usually replaces the old one, and that often makes sense if your inverter is getting old. See adding a battery to existing solar and adding a battery to an old inverter.

Can solar go on any roof?

Most roofs, yes. We check the roof type, pitch and shading before we design anything.

Which panels are best for shade or trees, and can I have all-black panels?

Shade from trees or buildings does reduce output, so we look at it before we design. We lean to AIKO for shaded or tight roofs: its cell design reduces shading losses (it doesn’t remove them), and its all-black versions have a clean face with no visible cell lines. Jinko suits straightforward roofs with good sun and room. If the shade is heavy, we talk about other options, such as a different layout. See AIKO vs Jinko solar panels.

Single or three phase, export limits and inverter size: what applies to me?

Most Northern Rivers homes are single-phase; phase decides which inverter and battery models fit and what a battery can back up. Essential Energy commonly applies a 5 kW export limit, sometimes lower, and your connection offer states yours. It limits what you send to the grid, not how much solar you can install. Many systems have more panel capacity than inverter capacity, within what the network approval allows, so we check your phase and limit before we settle the inverter and panel count. See single-phase vs three-phase and solar export limits.

Does my switchboard need upgrading (RCBOs)?

Many older boards need some work. The Wiring Rules require 30 mA safety switch protection on new and altered circuits, and solar and batteries need their own breakers, isolation and space on the board. How many RCBOs you need depends on how many circuits your board has. A photo of your switchboard helps us see early; we check it in person before install, and anything needed is agreed with you in writing before install day. See switchboard upgrades and RCBOs.

Can panels go on a flat apartment or unit roof?

Often, yes. Units and townhouses usually need body corporate (strata) approval for roof work, and we can give you the details your strata committee will ask for. On a flat roof we check the roof membrane and how the panels can be mounted without damaging it. See residential solar.

Should I re-do my roof before the panels go on?

If your roof will need replacing in the next few years, it’s usually better to do it first, because taking panels off and putting them back later is extra work and cost. Tell us about the roof’s age and condition, and we’ll give you an honest view before install.

If we move or renovate, can the panels be moved?

Panels can be taken down and put back up, for example around a renovation or a re-roof. It’s a separate job with its own cost, and moving a system to another property also needs new paperwork with the network there. Talk to us early so we can plan it.

Rebates, the NSW 0% loan and cost

Roughly what will solar and a battery cost?

It depends on how much power you use, your roof, your switchboard and the battery size, and the federal rebates are built into every price. The quickest way to see a typical price range for your home is our free solar and battery price calculator, which takes about a minute. To see your battery rebate on its own, try the battery rebate calculator. Your exact price comes in your proposal, after we’ve looked at your bills. See what decides the cost.

Do rebates run out?

The federal Cheaper Home Batteries rebate and solar STCs are taken off at point of sale, and we do the paperwork. Solar STCs step down every January, so the same system gets a slightly smaller rebate each new year.

Is the battery rebate a one-off, and does it shrink for bigger batteries?

Only one battery claim is allowed per property. The rebate is tapered by size: the full rate applies to the first 14 kWh of usable capacity, a reduced rate from 14 to 28 kWh, a much lower rate from 28 to 50 kWh, and nothing beyond 50 kWh. It also steps down on 1 January 2027 and again on 1 July 2027, set by your install date. See the battery rebate step-down.

Is there a loan to help pay for solar and a battery?

The NSW Government’s Home Energy Saver program offers eligible NSW homeowners a 0% interest loan of up to $15,000 for solar and batteries, through Brighte, over up to 10 years. Rebates come off first, then the loan covers the rest. Eligibility criteria apply and loans are subject to lender approval. We’ll run you through it on your call.

How do the loan repayments and deposit work, and can pensioners apply?

At 0% the repayment is simply the amount divided by the months: for example $15,000 over 10 years is $125 a month, or $10,000 over 10 years is $83.33. Your price is the same whether you use the loan or pay yourself. There’s no deposit when the loan covers your system, and a 10% deposit if you pay with your own money. The published criteria are about owning the property in NSW, a combined household income of $150,000 or less, being an Australian citizen or permanent resident, and Brighte’s credit assessment, so there’s no pension rule in them; Brighte makes the decision. See the NSW Home Energy Saver loan FAQ. Loans by Brighte. Eligibility criteria apply, subject to lender approval.

How do I check your bank details are real before I pay?

We never change our bank details by email. Before you pay a deposit or an invoice, call us on 0483 903 020 to confirm the details. If you ever get an email saying our bank details have changed, don’t pay it: call us first.

Install, grid connection and paperwork

Do you visit before the install?

Yes, every job. We check your battery can go in a compliant position, assess your switchboard (including any RCBO upgrades needed to meet current safety standards) and make sure you’re happy with the plan. No hidden surprises or extra costs on the day.

How long does installation take, and how soon can you start?

Usually one day, done by our own electricians. Grid connection typically follows one to three weeks later, and we handle the grid application. Before that, the network connection application has to be approved and we do the site visit, so we confirm your install date once you’ve gone ahead. The wait is normally two to four weeks from when you go ahead, depending on our booked installs at the time. See what happens on install day.

Do I need a smart meter for solar?

Yes. In NSW a smart meter is installed or configured as part of getting solar connected, often after install day. We handle the grid application and the chasing. There may be a charge if your meter board needs work. See how grid connection works in NSW.

How do I find my NMI for the paperwork?

Your NMI (National Metering Identifier) is printed on your power bill, usually near your supply address or meter details; it’s 10 or 11 characters long. If you can’t find it, send us your whole latest bill, every page, and we’ll find it for you. See how to read your power bill.

Do I need council approval?

Most homes don’t. We check and manage any permits that are needed.

EV chargers, off-grid and energy plans

Can you add an EV charger now or later, and does it work with the battery?

Yes, either way, and with or without solar. A charger needs its own circuit and the right safety switch protection, so we check your switchboard and the cable run first. With a battery, we set rules so the car doesn’t drain the house battery overnight unless you want it to, and Sigenergy has its own EV charger that works with the same system. See home EV charger installation and charging your EV from solar and a battery.

Can I go off-grid, now or later?

Yes, we design and install off-grid systems, mostly on hinterland properties where the grid is far away. Off-grid needs a large battery, a control system and usually a generator for long wet spells, and a generator can be set up to start automatically if the system supports it. For most homes on the grid, keeping the connection and adding a backup battery is the more cost-effective choice, and some grid-connected systems can take a generator for long outages. See off-grid solar and off-grid or grid-connected with a battery.

Can I charge my battery from a free-power plan?

Often, yes. Some retailers offer plans with free or very cheap hours, and most batteries have a time-based mode that can charge from the grid in set hours and use that power in the evening. Whether a battery, a free-power plan or both suits you depends on your solar, your evening use and the plan’s other rates, so we look at it with your bills. See battery modes explained and time-of-use and feed-in tariffs.

Can my hot water run off solar instead of the controlled load?

Often it can. An existing electric hot water system on controlled load (off-peak) can be set on a timer to heat in the middle of the day from your solar. Moving it off the controlled-load tariff can change your bill and may need your retailer to change the meter set-up, so we weigh it up from your bills first. See how tariffs work with solar.

What is a VPP, and is a retailer like Amber worth it with a battery?

A virtual power plant (VPP) is a group of home batteries that a retailer or other company controls together, in return for things like lower prices, higher feed-in credits or a payment. Some retailers, Amber among them, pass on wholesale prices that change through the day and can manage your battery around them. Joining is optional: it can suit some homes, but weigh up the deal, battery wear, your warranty and how much you’d keep for blackouts. When Amber suits your battery set-up, we refer you to Amber directly, and we set your battery up so you can join a VPP later if you want. See should I join a VPP.

About us and getting started

Are you a local company or a call centre?

We’re a local Northern Rivers business, based near Mullumbimby, not a call centre and not a government program. The NSW loan and the federal rebates are government schemes; we’re the licensed electricians who design and install the system and apply them for you. See our story.

Do you use subcontractors?

No. We do the work ourselves. Our own in-house team designs every system and does every install.

What warranties do I get?

A 25-year workmanship warranty on our installation work, a 25-year panel performance warranty, a 10-year battery warranty and a 10-year inverter replacement warranty. Equipment is covered by the manufacturers’ warranties.

Where do you work?

The NSW Northern Rivers, from Tweed Heads south to Evans Head and west to Lismore. We don’t work over the Queensland border.

How do I get started?

Send us one or two recent power bills for a free energy assessment, or leave your details and we’ll text you to set up a quick call. We size the system to how you actually use power, not a generic package.

Still have a question?

Check my rebate & 0% loan →

We’ll text you within minutes. Or call 0483 903 020.

More answers: Help and how-to guides for your solar and battery system

Related guides: Solar export limits in the Northern Rivers | Single-phase vs three-phase solar and batteries | Whole-home vs essential-circuits battery backup | Adding more solar panels to an existing system | AIKO vs Jinko solar panels | Backup Reserve explained

More from Sun Connect Solar: your rebates; FAQ; recent installs: Solar and a 24 kWh Sigenergy battery, Mullumbimby area · 24 kWh Sigenergy battery added to existing solar, Lismore · 33 kWh GoodWe battery added to existing solar, Lismore.