Get a free on-site commercial assessment
Solar and batteries for Northern Rivers businesses, up to 1 MW. Commercial finance through Solaris Finance.
Checked and updated by our licensed electricians: October 2026
Most solar panels on a pitched roof get a decent wash every time it rains. In the Northern Rivers, though, a few things rain doesn’t shift well: salt film near the beach, bird droppings, pollen and leaf litter from hinterland trees, and dirt that settles on low-pitch roofs. When that builds up, panels make less power than they should. We have a local solar panel cleaning partner who we pass you over to, and this page explains when a clean is worth it and what the panel makers allow.
Request a panel clean and we’ll pass you to our local cleaning partner. Use the short panel cleaning form on this page, or text 0483 903 020 with “panel clean” and your suburb. We only pass your details on with your OK.
A drop in output is not always dirt. New shade from a growing tree, an inverter fault or a setting can do the same thing. If your numbers have fallen, our guide to what to check when solar is not producing goes through the common causes, and our help pages explain the GoodWe SEMS apps and what to do when a battery app goes offline. If we installed your system, tell us and we can help you look at that first.
We install AIKO and Jinko panels. Both makers publish cleaning rules in their installation manuals, and following them protects your panel warranty:
Comparing the two brands? See AIKO vs Jinko. Panels on another brand have their own manual, and the same basics apply.
What is fine: from the ground on a single-storey home, a soft, long-handled broom or a gentle spray from a garden hose, with the water falling on the panels like rain, in the cool of the morning or late afternoon. Your battery and inverter are a different story: never hose or wipe them down with water; see what you can safely check on your solar and battery.
There is no fixed timetable. Jinko’s baseline is about once a year, more in dusty conditions; AIKO says it depends on how much dirt collects. In practice, near the coast, under trees or birds, or on a low-pitch roof, many homes need a clean more often than a house on a steep inland roof that gets regular rain. Queensland’s Electrical Safety Office also recommends an inspection at least once a year and keeping an eye on your monitoring in between, especially after storms.
Cleaning covers the glass only. If something looks wrong beyond dirt (a cracked panel, a loose rail, damage after a storm), that is a job for a licensed electrician: see solar repairs and inspections and after a storm or flood.
The Northern Rivers of NSW only: Tweed Heads, Banora Point, Bilambil Heights, Kingscliff, Pottsville, Murwillumbah, Mullumbimby, Ocean Shores, Brunswick Heads, Byron Bay, Suffolk Park, Bangalow, Lennox Head, Ballina, Alstonville, Lismore, Goonellabah, Coraki, Woodburn and Evans Head. That is from the Queensland border at Tweed Heads south to Evans Head and west to Lismore; we don’t cover Queensland. See the towns we cover.
Not always. On a roof with a decent pitch, rain washes off most light dust, and both AIKO and Jinko say the need depends on how much dirt builds up. Panels do need a clean when grime stays put: salt film near the beach, bird droppings, pollen or leaf litter that rain does not shift, or a flat roof where water sits. Jinko suggests about once a year, more often in dusty conditions.
Mostly, if the panels are tilted. AIKO’s manual says panels at an adequate tilt let rainwater clean the surface and reduce how often they need cleaning, and SolarQuotes puts the useful line at about 10 degrees or more. Rain does not clear bird droppings well, and on flat or very low-pitch roofs dirt tends to settle along the bottom edge.
More often than inland, as a rule. Queensland’s Electrical Safety Office notes that systems close to the ocean may need more regular maintenance because of wind and salt deposits, and areas with more vegetation or dust may need more regular cleaning. Jinko’s baseline is about once a year. The simplest guide is your own monitoring: if output on clear days has slipped and the glass looks filmy, it is time.
Best not. Solar Victoria says never to use a pressure hose on panels because it could damage them, and SolarQuotes warns that high-pressure spray can harm the seal between the glass and the frame. AIKO’s manual sets a maximum water pressure and limits on water hardness and pH for its own water-cleaning method, which a household pressure washer and tap water are not set up to meet. Water should fall on the panels like rain.
Cleaning the way the maker says does not. Doing it the wrong way can: Jinko says chemicals may affect the module warranty, AIKO says not following its manual invalidates the limited product warranty, and both rule out abrasive tools. Solar Victoria suggests checking your warranty before any cleaning service works on your panels.
It depends on the number of panels, the roof height and pitch, and access, so there is no single price. Our local cleaning partner sets their own price and confirms it with you before anything is booked.
From the ground, with a soft broom or a gentle hose on a single-storey home, often yes. On the roof, no. SafeWork NSW lists falls from heights and contact with electricity as the main rooftop solar hazards, panels make electricity whenever light is on them, and Solar Victoria says cleaners should not stand on or put anything on the panels. Never clean a panel with broken glass or exposed wiring.
They can. Droppings shade part of a panel, and because most home systems wire panels together in strings, one heavily marked panel can pull down the output of others on the same string. SolarQuotes suggests soaking droppings rather than scrubbing them. If birds roost above the array, they will keep coming back.
No. We are electricians. We have a local solar panel cleaning partner, an independent business, who we pass you over to, and they quote, book and do the cleaning directly with you. We only pass on your details with your OK.
The Northern Rivers of NSW only, from Tweed Heads to Evans Head and west to Lismore: Tweed Heads, Banora Point, Bilambil Heights, Kingscliff, Pottsville, Murwillumbah, Mullumbimby, Ocean Shores, Brunswick Heads, Byron Bay, Suffolk Park, Bangalow, Lennox Head, Ballina, Alstonville, Lismore, Goonellabah, Coraki, Woodburn and Evans Head. We do not cover Queensland.
AIKO PV Module Installation Manual (Mono Glass, version 4.0, April 2024), section 9 Maintenance. JinkoSolar Installation Manual for Photovoltaic Module, section 4 Maintenance and Care. AIKO TUV Rheinland IEC 61701:2020 salt-mist certificates. Solar Victoria, How to clean and maintain solar panels. Electrical Safety Office Queensland, Solar energy systems: inspections and maintenance. SafeWork NSW, Solar panel retail and installation. SolarQuotes, How to clean solar panels. Checked October 2026.
Request a panel clean and we’ll pass you to our local cleaning partner. We only pass your details on with your OK.
Or text 0483 903 020 with “panel clean” and your suburb.