Get a free on-site commercial assessment
Solar and batteries for Northern Rivers businesses, up to 1 MW. Commercial finance through Solaris Finance.
Checked and updated by our licensed electricians: October 2026
Our customer? Text 0483 903 020 and Liv, our support assistant, will help you work through it. Thinking about a battery in the Northern Rivers NSW? Our own electricians install and look after Sungrow, SolaX and Tesla batteries from Tweed Heads to Evans Head and Lismore: see the towns we cover. We install in the Northern Rivers only.
Short answer. “VAST” is SolaX’s X1-VAST single-phase hybrid inverter (5, 6, 8 and 10 kW), paired here with the SolaX HS51 modular lithium battery. You monitor it in the SolaXCloud app. The inverter’s front panel has an operating light and an error light, and the app shows the battery level. Green and steady is fine; an error light means call us.
Safety first. Never open a switchboard, remove a cover from your battery or inverter, or touch any wiring. Anything beyond the app, a light you can read from a safe distance, or your own router is a job for a licensed electrician. If you see smoke, smell burning, hear arcing or see water on or near the unit: keep everyone away, switch off at your main switch only if it is safe to do so, and call 000 if there is any fire or smoke.
The X1-VAST is a hybrid inverter: it takes your solar, charges the battery, runs the house and sends power back to the grid, with a backup (EPS) output for blackouts. SolaX lists four models, 5, 6, 8 and 10 kW, with up to four solar inputs and two battery ports. The HS51 battery is made of 5.1 kWh LFP modules, from 10.2 kWh up to 66.5 kWh in total, rated IP66 for indoor or outdoor use. SolaX says it switches to backup in under 10 milliseconds.
The X1-VAST has a control panel with a screen and indicator lights. SolaX’s manual describes them like this:
The wording on some firmware versions differs slightly, so photograph what you see and call us rather than guess.
SolaX’s manual lists six working modes when the grid is on:
In Backup mode the manual gives two reserve levels: a minimum charge while the grid is on (30% by default) and a minimum while off-grid (10% by default). Defaults depend on the firmware, so treat these as examples. In Self use, once the battery has fallen to its minimum level, the inverter will not necessarily provide backup in an outage, which is why Backup mode matters for storms. Our general explainers: Backup Reserve and battery modes.
SolaX’s manual describes inverter firmware updates from a USB drive, using files supplied by SolaX service, and warns that the wrong file or an interrupted update can stop the inverter working. SolaX also lists remote upgrade and diagnosis for the HS51 battery. Either way, this is installer work: call us. See does my battery update itself?
The batteries we install carry a 10-year battery warranty, with SolaX’s conditions in its warranty documents (under Support on SolaX’s website). SolaX’s manual also says opening the inverter enclosure without authorisation voids the warranty. Our 25-year workmanship warranty covers our installation work only. See where to find your warranty documents.
When the error light is on, the screen shows a fault message and code; SolaX’s manual lists the code table and says the installer should handle anything inside the unit.
If you ever need to isolate the system, use the shutdown procedure on the label on your inverter, in the order shown, and then call us.
Read more: Sungrow, Solax and Tesla batteries from Sun Connect Solar and Wi-Fi and app basics for Sungrow, Solax and Tesla
If we installed your system, call us on 0483 903 020. Our service help for existing customers is free: we start by working through it with you by phone. If you are not yet a customer, a service call is $250 + GST, which covers one hour on site within 20 km of Mullumbimby; travel further out is quoted separately. Contact us or call 0483 903 020 (open 24 hours, 7 days). We do not repair systems we did not install.
It is SolaX’s single-phase hybrid inverter for homes, sold in 5, 6, 8 and 10 kW sizes. In Australia it is paired with SolaX’s HS51 battery. The inverter handles your solar, the battery and the backup output.
SolaXCloud, on iPhone and Android, or the SolaXCloud website. It connects through the Wi-Fi dongle on the inverter.
Self use suits most homes: solar feeds the house first, then charges the battery, then exports. Backup mode keeps the battery fuller for blackouts. Tell us your priority and we will set it.
The X1-VAST has an emergency power supply (EPS) output, and SolaX’s Australian manual describes whole-home backup. What is backed up depends on how we wired it and which settings are on, so ask us about yours.
Not in the app: SolaX’s manual describes a USB-drive update with files from SolaX service, which is installer work. Please call us.
Thinking about a SolaX battery? Our own team installs SolaX batteries across the Northern Rivers.
Start with the free tools (no details needed to see a result): solar and battery price calculator, is my solar battery-ready? checker or the 60-second battery quiz.
See all the free calculatorsBook a free 15-minute chat
The chat is with our head electrician, about your power bills and what you want from a system. No obligation and no sales script; the firm price comes after we have seen your bills and your home.
Last checked 7 October 2026. Only the manufacturer’s, the network’s or the government’s own documents are used; app menus and defaults change between models and versions, so if your screen looks different, call us rather than guess.