Get a free on-site commercial assessment
Solar and batteries for Northern Rivers businesses, up to 1 MW. Commercial finance through Solaris Finance.
Checked and updated by our licensed electricians: October 2026
Our customer? Text 0483 903 020 and Liv, our support assistant, will help you work through it. Thinking about a battery in the Northern Rivers NSW? Our own electricians install and look after Sigenergy batteries from Tweed Heads to Evans Head and Lismore: see the towns we cover. We install in the Northern Rivers only.
Short answer. Sigenergy’s official owner method is the app: tap Setting in mySigen to turn the device off or on. Its other method means removing the covers and operating the unit’s own switches, which is for a licensed electrician only.
Most of the time you never need to do this. A restart is not a fix for an alarm or fault, and a battery that shows a fault should be looked at by us rather than switched off and on repeatedly.
Safety first. Never open a switchboard, remove a cover from your battery or inverter, or touch any wiring. Anything beyond the app, a light you can read from a safe distance, or your own router is a job for a licensed electrician. If you see smoke, smell burning, hear arcing or see water on or near the unit: keep everyone away, switch off at your main switch only if it is safe to do so, and call 000 if there is any fire or smoke.
If you cannot find the option, or the screen looks different to what is described, do not go looking for switches on the unit. Call us.
Sigenergy’s manual also describes a manual method that begins by removing the side and top decorative covers, turning off the connected switch in the backup distribution panel and turning the unit’s DC switch off, then waiting the time shown on the unit’s label. That is installer work. Please do not attempt it.
From Sigenergy’s manual: in a fire or flood, if it is safe, shut down the equipment or turn off the main power switch, keep away from the battery, and call the fire brigade (000) if a fire is spreading. If a battery has been under water, dropped or hit, or smells or leaks, do not touch it and call a professional. Do not use the equipment again until we have checked it.
Sigenergy says that after a long period of inactivity, such as being offline for several days or very few operating hours, the system sends a reminder, and if there is no response it may turn itself off as a safety measure. To get it going again, contact us.
If we installed your system, call us on 0483 903 020. Our service help for existing customers is free: we start by working through it with you by phone. If you are not yet a customer, a service call is $250 + GST, which covers one hour on site within 20 km of Mullumbimby; travel further out is quoted separately. Contact us or call 0483 903 020 (open 24 hours, 7 days).
Sigenergy’s manual asks for more than 10 seconds between turning it off and on.
The app method is the one Sigenergy gives to owners. Using the unit’s own switches in the wrong order is what we want to avoid, which is why that is left to us.
If there is any fire, smoke or water near the unit, and it is safe to reach, yes: switch off at your main switch, keep away and call 000 if there is fire or smoke. Otherwise call us.
No. Check your Wi-Fi first. Our Wi-Fi guide covers it.
Thinking about a Sigenergy battery? Our own team installs Sigenergy batteries across the Northern Rivers.
Start with the free tools (no details needed to see a result): solar and battery price calculator, is my solar battery-ready? checker or the 60-second battery quiz.
See all the free calculatorsBook a free 15-minute chat
The chat is with our head electrician, about your power bills and what you want from a system. No obligation and no sales script; the firm price comes after we have seen your bills and your home.
Last checked 6 October 2026. Only the manufacturer’s or the network’s own documents are used; app menus change between versions, so if your screen looks different, call us rather than guess.